Jet 690082 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine

Jet 690082 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine Review

Jet 690082 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine Feature

• 2HP, 3Ph, 2-speed, 230V motor
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• 16 spindle speeds ranging from 80-5440 RPM
• Built with coolant system(coolant pump not included)

Includes 9-in x 42-in 2 HP 3-Phase Vertical Milling Machine - 690082, One-Shot Lubrication System, Way Covers, Draw Bar, Tool Box &, Tools

Annular Cutter & Magnetic Drill Accessories - Unibor <font size=1>(Coolant / Arbors / Drill Chucks) </font size=1> Model No.: UP 001, 3/4" Milling Machine Adapter 3/4" Weldon Shank

Annular Cutter & Magnetic Drill Accessories - Unibor (Coolant / Arbors / Drill Chucks) Model No.: UP 001, 3/4" Milling Machine Adapter 3/4" Weldon Shank Review

UNIBOR Portable Magnetic Drills

SHOP FOX M1111 6-Inch by 21-Inch Mill and Drill

SHOP FOX M1111 6-Inch by 21-Inch Mill and Drill Review

SHOP FOX M1111 6-Inch by 21-Inch Mill and Drill Feature

• Number of lathe speeds: 12
• Cross slide table
• 4-way turret tool post
• Steady rest
• Follow rest

This M1111 Milling Machine has all of the important features of the M1110, but with a few extra time-saving luxuries. However, this mill is further fortified with a quick-tilt headstock for horizontal milling, 1 HP brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. The quick reversing tapping feature also makes hole threading simple. Just put the machine in "tapping mode", start the tap, and when the thread is completed, push the button at the end of the rack levers and the spindle reverses, immediately withdrawing the tap from the hole. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material. All of these extra features make the M1111 Milling Machine one of the most sought after machines available!

3/16" to 3/4"" DRILL CHUCK w/R-8 taper for milling machine!!!

3/16" to 3/4"" DRILL CHUCK w/R-8 taper for milling machine!!! Review

3/16" to 3/4"" DRILL CHUCK w/R-8 taper for milling machine!!! Feature

• INCLUDES R-8 TAPER
• Fits BRIDGEPORT R-8
• BRAND NEW
• WILL WORK IN ANY MACHINE WITH R-8 TAPER

BRAND NEW 3/16" to 3/4"" DRILL CHUCK REPLACEMENT INCLUDES R-8 TAPER Fits BRIDGEPORT R-8 and any other R-8 mills .

JET JTM-4VS Vertical Mill with Anilam 411 DRO and X AXIS TPFA

JET JTM-4VS Vertical Mill with Anilam 411 DRO and X AXIS TPFA Review

JET JTM-4VS Vertical Mill with Anilam 411 DRO and X AXIS TPFA Feature

• Meehanite casting
• Precision bored and honed milling head
• Large diameter quill is chromed
• High precision Class 7 spindle beardings

The JTM-4VS with X Powerfeed is the perfect solution for maintenance shops, repair shops, schools and light production. The 3 HP motor requires 230/460V, 3-phase (prewired 230V). Durable Meehanite casting and a precision bored and honed milling head. Chromed, large-diameter quill and high-precision Class 7 spindle bearings and R-8 spindle taper. HP: 3, Volts: 230/460V (prewired 230V), Speed (RPM): 60 - 4,200, Speeds (qty.): Variable, Vertical Stroke: 5, 360deg Head Swivel: Yes, Draw Bar: Yes, Swing: 19, Chuck Size (in.): 5/8, Max. Spindle Distance (in.): 17 1/2, Worktable L x W (in.): 9 x 49, Light Included: No, Stand Included: Yes, Dimensions L x W x H (in.): 63 x 66 x 85

Grizzly G8688 7" x 12" Mini Metal Lathe

Grizzly G8688 7" x 12" Mini Metal Lathe Review

Powered by a 3/4 H.P. motor, this lathe also features: variable speeds (0-2500 RPM), inch and metric reading dials, turret tool post, chip tray & splash guard. Features: ? Variable Speed ? 16 TPI Reversible Leadscrew ? Forward and reverse in all speeds ? Chip Tray & Backsplash Guard ? Threading Dial Indicator ? Standard & Metric Graduation Specifications: ? Swing over bed: 7" ? Distance between centers: 12" ? Spindle bore: 20mm ? Spindle nose taper: MT #3 ? Tailstock taper: MT #2 ? Tailstock travel: 2-1/2" ? Cross-slide travel: 2-3/4" ? Maximum tool bit size: 5/16" ? Speed range: Low Range: 0-1100 RPM, High Range: 0-2500 RPM ? Range of threads: 12-52 TPI ? Motor: 3/4 HP, 110V ? Number of thread pitches: 18 inch & 10 metric ? Net weight: 74 lbs. ? Shipping weight approximate: 89 lbs. Standard Equipment: ? 3" Three-Jaw Chuck with External Jaws ? 6-1/4" Face Plate ? Steady Rest ? Four-Position Turret Post ? Complete Set of Change Gears ? MT #2 Dead Center ? Wrenches

Central Machinery Vertical Milling Machine

Central Machinery Vertical Milling Machine Review

Central Machinery Vertical Milling Machine Feature

• Head tilts 45° left or right
• 9 spindle speeds: 240, 355, 545, 735, 1342, 1425, 1650, 2350 and 2885 RPM
• Swing: 13"
• Longitudinal travel: 15-1/2" maximum
• Cross travel: 6";

For all kinds of milling jobs, this Vertical Milling Machine has the power and features to help you work smarter and - Visit Harbor Freight Tools For More Information.

5" Cross Slide Drill Press Vise Metal Milling Machine

5" Cross Slide Drill Press Vise Metal Milling Machine Review

5" Cross Slide Drill Press Vise Metal Milling Machine Feature

• Provides solid, stable platform for exact centering and accurate drilling
• Cross-slide design provides two-axis precision adjustments for perfect bit placemen
• Heavy-duty cast steel construction with machined cold-rolled steel screws, chrome handle
• Easy secure attachment to any drill press table with multiple mounting lugs
• Vise handles drop down out of the way for safety, freedom-of-movement.

A fully adjustable heavy duty 5" Cross Slide Vise. Turn your drill press into a milling machine. Our cross slide drill press vise features: Heavy duty construction, Jaw width: 5", Maximum jaw opening: 4 1/2", Vise and cross slide have adjustable shims for fine adjustment, Base size: 9 3/4" x 5 1/2", Overall unit size 11 1/2" x 11 1/4" x 6 3/4", Precision threaded clamping and cross slide screws, Cross slides have removable adjusting crank handles

Bolton 3 Axis CNC Milling Machine 11.8"x39.4" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included

Bolton 3 Axis CNC Milling Machine 11.8"x39.4" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included Review

Bolton 3 Axis CNC Milling Machine 11.8"x39.4" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included Feature

• Large travels - 17.71" x 11.42" x 11.02"
• Spindle speeds - 100-3000RMP
• Spindle motor - AC 2HP 3-Phase. or 1-Phase
• GREAT CNC control
• Full CNC automatic operation.

1.GREAT CNC control. 2.Full CNC automatic operation. 3.Tool length and cutter compensation. 4.Y-axis bedway metal cover. 5.Variable speed inverter drive spindle motor. 6.Large travels - 17.71" x 11.42" x 11.02" 7.High accuracy ball screws grade P4. 8.MANUAL lubrication and coolant system. SPECIFICATIONS£º 1.Working table area - 11.8"x39.4" 2.T-Slots - 5/8 x 2.36" 3.Longitudinal travel(X) - 17.71". 4.Cross trave(y) - 11.42". 5.Vertical travel(Z) - 11.02" 6.Head tilt - 90-0-90 7.Spindle nose to table surface - 0.78-11". 8.Spindle center to column distance - 12". 9.Spindle speeds - 100-3000RMP 10.Spindle taper - R8. 11.Spindle motor - AC 2HP 3-Phase. or 1-Phase 12.Voltage - 220V. 13.CNC control systems - GAEAT-150IM. 14.X-axis Servo motor/torque - 110 BYG3501/8N.M 15.Y-axis Servo motor/torque - 110 BYG3501/8N.M 16.Z-axis Servo motor/torque - 110 BYG3501/8N.M 17.# of electronic handwheelw - 1. 18.Floor space requirde(LxW) - 77.2" x 40.4" 19.Height requirde(H) - 46" 20.Weight - 1730lbs 21. Shipping Weight - 2200lbs.

Palmgren MVS60 6-Inch Milling Machine Vise with Swivel Base, Dark Grey

Palmgren MVS60 6-Inch Milling Machine Vise with Swivel Base, Dark Grey Review

Palmgren MVS60 6-Inch Milling Machine Vise with Swivel Base, Dark Grey Feature

• Jaw width: 6-Inch
• Jaw opening: 6-Inch
• Throat depth: 2-Inch
• Jaw deflection: 0.002-Inch at 4,000 -Pound

This tough vise is used for milling and other demanding machine applications. Hardened moveable jaw plates are square to 0.0015-Inch. Replaceable smooth jaw plates made of hardened and ground tool steel (replaceable); large cast iron crank handle. The base and bed are parallel to 0.002-Inch. The removable base swivels 360-Degree (1-Degree graduations) and can be fastened in place with two bolts.

JET 690050 JTM-1050 Variable Speed Vertical Milling Machine

JET 690050 JTM-1050 Variable Speed Vertical Milling Machine Review

JET 690050 JTM-1050 Variable Speed Vertical Milling Machine Feature

• Meehanite casting
• Hardened and ground table
• Chrome lead screws on X and Y axis
• Turcite B on X and Y axis
• Satin chrome finished dials

Includes JTM-1050 Variable Speed Vertical Milling Machine - 690050, Internal Coolant Tank Built (Coolant Pump Not Included), One-Shot Lubrication System, Way Covers, Draw Bar, Tool Box

Zen Toolworks CNC Carving Machine DIY Kit 7x7

Zen Toolworks CNC Carving Machine DIY Kit 7x7 Review

Zen Toolworks CNC Carving Machine DIY Kit 7x7 Feature

• 7(X) x 7(Y) x 2(Z) inches travel capacity
• PVC Frame, Steel guide rods and precision linear bearings provide maximum accuracy and rigidity
• New Nema 17 Stepper Motor included, 2 Phase, 4 Wires, 1.3A
• M8 x 1.25 Stainless Steel Lead Screws with ball bearng end support
• Effective backlash elimination with brass Anti-Backlash Lead Screw nuts

NOT INCLUDED - This is just the CNC machine with motors. You will need a 3 Axis Stepper Motor Driver to manage each motor, a spindle/cutter (a Dremel would work) and a DC power supply for the driver. You will also need a computer with a standard printer port and CNC software. - You will also need a way to mount and secure the spindle/cutter tightly to the Z-axis plate on the machine. We offer a Spindle Kit complete with a mounting frame for this machine. We also offer a 3 Axis Stepper Motor Driver that we use with our CNC systems.

You can see some video demos of this machine in action. Just go to YouTube and search for "Zen Toolworks CNC"

You are looking at a DIY kit of a CNC carving machine. Now you can build your very own CNC carving machine to do relief carving, letter cutting, inlay and all other interesting features to enhance your woodworking, PCB or other projects.

The body of the machine is constructed with high density PVC boards. Steel guid rod, linear bearing and stainless steel lead screws are used to construct the moving parts. The anti-backlash brass nut design will virtually eliminate all backlashes. New Nema 17 motors(2 phases, 1.3A, 4 leads) for all three axis are also included. The install is very easy, if you have a bench vise and a power screw driver, that will really help. Install instruction CD is included in the package. Assembling the CNC is very fun and only takes around 3-4 hours to complete. You will be amazed by what can be achieved by this machine. Finally, you can build and own your very own CNC machine for a price that's within your budget!

When you purchase, you will be invited to join our member-only discussion forum. This is a good place to get support and learn from other CNC users and share your own knowledge.

Bolton Tools At-320 12" X 30" Combination Lathe Milling Machine, 12 Speeds with a Flip of a Lever,1 1/2" Spindle Bore, Mill Head R8, Seperate Lathe 1 1/2 Hp and Mill 3/4 Hp Motors, 110v or 220v Ships with Standard Accessories and 1 Year Warrantty

Bolton Tools At-320 12" X 30" Combination Lathe Milling Machine, 12 Speeds with a Flip of a Lever,1 1/2" Spindle Bore, Mill Head R8, Seperate Lathe 1 1/2 Hp and Mill 3/4 Hp Motors, 110v or 220v Ships with Standard Accessories and 1 Year Warrantty Review

Bolton Tools At-320 12" X 30" Combination Lathe Milling Machine, 12 Speeds with a Flip of a Lever,1 1/2" Spindle Bore, Mill Head R8, Seperate Lathe 1 1/2 Hp and Mill 3/4 Hp Motors, 110v or 220v Ships with Standard Accessories and 1 Year Warrantty Feature

• Bolton Tools At-320 12" X 30" Combination Lathe Milling Machine, 12 Speeds with a Flip of a Lever,1 1/2" Spindle Bore, Mill Head R8, Seperate Lathe 1 1/2 Hp and Mill 3/4 Hp Motors, 110v or 220v Ships with Standard Accessories and 1 Year Warrantty

Geared Combo Lathe/Mill Drill 12" x 30" ,1 1/2" hp lathe motor & 3/4 hp mill motor ,110v or 220v,1 1/2" " spindle bore, 12 lathe speeds ,4 mill speeds, 5-48 TPI, 6 1/4" cross slide travel , low tolerance! R8 Mill

Grizzly G0499 10" X 54" 3-Axis CNC Milling Machine

Grizzly G0499 10" X 54" 3-Axis CNC Milling Machine Review

Grizzly G0499 10" X 54" 3-Axis CNC Milling Machine Feature

• Cross travel: 16"
• Longitudinal travel: 31.75"
• Quill diameter: 105mm
• Quill travel: 6"
• Table size: 10" x 54"

We want your CNC purchase from Grizzly to be as pleasant and painless as possible. For this reason, an 0.00 "set-up" charge is applied after purchase and after a Centroid™ technician has visited your location in the lower 48 states to give you or your employees a one day training on the use of the controller. Further, Centroid™'s technicians will be able to provide support via phone if needed. Visit their website at www.centroidcnc.com. A Ball-Bar testing report is enclosed with each machine. The bearings used are high precision C7(P4, GMN) class for spindles. They also feature high precision ball screws (C5 class) with double nuts for X and Y axis, Meehanite castings with Turcite for X and Y axis is used in the machines. The beds and knees feature square ways for extreme stability and dovetail ways for the column - all hardened and ground. Spindle speeds are 50-5000 RPM. Auto lubrication, work lamp, coolant system and chip tray are all standard equipment. Each machine is fitted with the Centroid™ M400 solid state controller with a 15" LCD display. The software included is conversational, with cutter radius compensation, drilling cycles, multi-range spindle and G-code backplot graphics. This is a NICE software package with features that includes LAN connectivity, USB file transfer and high speed "True 3D" machinery.

JET JMD-15 with NEWALL DP700 DRO Installed

JET JMD-15 with NEWALL DP700 DRO Installed Review

JET JMD-15 with NEWALL DP700 DRO Installed Feature

• One piece cast iron column for added support
• Belt cover ? quick slide latch allows faster belt adjustment to change spindle speeds
• Base ? taper allows for easier clean-up
• Larger hand wheel knobs
• UL Listed motor

Includes JMD-15 Milling/Drilling Machine w/ NEWALL C80 DRO - 350125

Wallmonkeys Peel and Stick Wall Decals - Milling Machine - 24"W x 16"H Removable Graphic

Wallmonkeys Peel and Stick Wall Decals - Milling Machine - 24"W x 16"H Removable Graphic Review

Wallmonkeys Peel and Stick Wall Decals - Milling Machine - 24"W x 16"H Removable Graphic Feature

• ALL orders CUSTOM printed. When you place an order, the image is made in the USA, just for you!
• Printed on WHITE, premium, self-adhesive, re-positionable fabric paper.
• No nails, frames or glue. No professional installation required.
• Simply peel and stick! Easy to remove and re-apply.
• BE SURE you ordered the right size for your intended use!

WallMonkeys wall graphics are printed on the highest quality re-positionable, self-adhesive fabric paper. Each order is printed in-house and on-demand. WallMonkeys uses premium materials & state-of-the-art production technologies. Our white fabric material is superior to vinyl decals. You can literally see and feel the difference. Our wall graphics apply in minutes and won't damage your paint or leave any mess. PLEASE double check the size of the image you are ordering prior to clicking the 'ADD TO CART' button. Our graphics are offered in a variety of sizes and prices.

WallMonkeys are intended for indoor use only.

Printed on-demand in the United States Your order will ship within 3 business days, often sooner. Some orders require the full 3 days to allow dark colors and inks to fully dry prior to shipping. Quality is worth waiting an extra day for!

Removable and will not leave a mark on your walls.

'Fotolia' trademark will be removed when printed.

Our catalog of over 10 million images is perfect for virtually any use: school projects, trade shows, teachers classrooms, colleges, nurseries, college dorms, event planners, and corporations of all size.

BOLTON TOOLS Precision Milling Machine Vises

BOLTON TOOLS Precision Milling Machine Vises Review

SPECIFICATIONS: 1. Jaw width............. 5' 2. Jaw opening ........5-1/2" 3. Jaw Height ............1- 10/16" 4. Throat depth .........1-1/2" 5. Weight ...................48 LBS FEATURES: 1. Comes with swivel base, easy to read 0 - 360 degree scales 2. The accuracy of vise(parallelism and squareness) is 0.025mm/100mm 3. The special segment in the movable jaw forces the vertical pressure downward as the horizontal pressure works, so that the jaws will not lift the workpiece. 4. Four positions allow extra capacity to change the opening of the jaws.